Biowell Medical EnterpriseSTAT FAX 303 PLUS MICROSTRIP READER
Product Description
1 Year Warranty on Parts and Lifetime Free Service
Features:
- Accepts all types of strips
- Automatic strip transportation
- Bichromatic optics, Standard model includes 4 filters
- Easy to use with step-by-step prompting
- On-board graphics printing
- Calculates results automatically
- Large, non-volatile memory stores more than 30 user-entered tests
- Standard model includes both 3x8 and 3x12 strip carriers for break-apart microwells
Product Specification
|
Photometric |
|
|
Linear Measurement Range |
0.003 to 3.0 Absorbance Units (A) |
|
Photometric Accuracy |
± (1% of the reading + 0.01 A) from 0 to 1.5A ± (2% of the reading + 0.01 A) from 1.5 to 3.0 A |
|
Stability |
Drift of no more than 0.005A in 8 hours |
|
Warm up time |
45 seconds, built-inn |
|
Light Source |
Tungsten Lamp |
|
Standard Wavelengths |
Standard: 405, 450, 492, 630nm Six Filter UV: 405, 450, 492, 630, 545 and 340nm Six Filter VIS: 405, 450, 492, 630, 600 and 545nm |
|
Type of Filter |
3-cavity hard coat interference filter, 10nm half band pass typical |
|
Vessel |
Single, double or break apart strips up to 12 wells long 3 strip loading capacity |
|
Electronic and Software |
|
|
Speed |
Reads, calculates and prints results for up to 12 wells in about 30 seconds |
|
Display |
LCD, 16” characters, 5x7 dot matrix |
|
Internal Printer |
Thermal, dot matrix, 20 characters per line |
|
Keyboard |
16-key, membrane switch, 4x4 |
|
Calculation Modes |
Single point calibration, Multi-point calibration with regression or point to point curve fit, cutoff, cutoff control, % Absorbance Multi-Point, Uptake |
|
Serial Port |
Output only, 2400 Baud, 1 start bit, 8 data, 1 stop, no parity, no handshake |
|
Power Source |
Switch selectable power supply (115V or 230V indicated) Voltage Source 110-120/220-240 VAC from 50 to 60 Hz, CAT II Power consumption is less than 50 watts Fuse: two 1/2A, T rating, 250V, 3AG type fuse All power cords must be approved for the country of use |
|
Certifications and Compliances |
NRTL Listed Standard UL -61010A-1, Electrical Equipment for Laboratory Use. CE Certificate of Conformity. Conforms to the following standards: EN 61010-1, EN 61326, following the provisions of the 98/79/EC IVD directive |
|
Physical |
|
|
Enclosure |
ABS Plastic cover with metal base |
|
Dimensions |
Approx. 9”x12”x3”, (23x30x8cm) 13 lbs (5.9 Kg) |
|
Environmental Conditions for Safe Operation |
Indoor Use Altitude up to 2000m Temperature 5ºC to 40ºC (Although it may be safe to operate in these conditions, t may not be suitable for the performance of your tests; check with your supplier.) Humidity 80% for temperature up to 31ºC, decreasing linearity to 50% humidity at 40ºC Mains supply voltage fluctuations not to exceed ±10% of nominal voltage |
|
Recommended Environmental Conditions |
|
|
Recommended Operating Temperature |
18-35ºC |
|
Recommended Operating Humidity |
Less than 80% |
|
Optional Accessories |
|
|
Available from your dealer |
DRI-DYE Check Strips for instrument QC, replacement lamps, fuses, thermal paper, serial cable |